23397356 Seal | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta seal weighing 0.005 kg, listed for 35 applications across D series engines and IPS pod drives. Seals are single-use.

🚤 Compatibility

• Engine Family: D, IPS
• HP Range: 145-480 HP

Full model list at the end of this description.

⚙️ Key Features

• 0.005 kg
• Listed for 35 applications across D series engines and IPS pod drives
• A single-use item

🔌 Function

Seals the joint it sits in, holding the pressure or keeping the fluid on the right side of it.

⚠️ Common Signs of Failure

• Weeping, drips or staining at the joint
• The level in the system it seals falling slowly
• The seal found flattened, hardened or taking a permanent set on removal
• Nicks, cuts or a spiral twist in the seal body
• Swelling or softening from the wrong fluid or from oil contamination

🛠️ Service Notes

• Seals are single-use - always fit new, never refit one that has been compressed
• Clean the groove and both mating faces, and check for the burr or score that cut the last one
• Do not stretch the seal onto the part during assembly, as a stretched seal will not recover its section

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D6-340I-G, D6-380I-G, D6-440I-G, D6-480I-G, D6-300D-G, D6-340D-G, D6-380D-G, D6-440D-G, D6-480D-G, D6-300I-G
• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13C2-B MP, D13C4-B MP, D13C5-B MP, D13C7-B MP, D13C8-B MP, D13C9-A MP
• Volvo Penta D4-175I-G, D4-230I-G, D4-270I-G, D4-320I-G, D4-300I-G, D4-145I-G, D4-175 VG
• Volvo Penta D8A5-A MH, D8A6-A MH, D8A1-A MP, D8A3-A MP, D8A7-A MP
• Volvo Penta D11C1-A MP, D11C3-A MP
• Volvo Penta IPS10-A, IPS10-B