23465249 Seawater Pipe | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta seawater pipe from the Cooling System group, weighing 1.39 kg and listed for 12 D series engine applications. Seawater pipework corrodes from the inside, so inspect the bore rather than the outside.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C2-A MP
• Volvo Penta D13C4-A MP
• Volvo Penta D13B-G MP
• Volvo Penta D13B-L MP
• Volvo Penta D13B-K MP
• Volvo Penta D13B-C MP
• Volvo Penta D13C6-A MP
• Volvo Penta D13C5-B MP
• Volvo Penta D13C5-A MP
• Volvo Penta D13C7-B MP
• Volvo Penta D13C8-B MP
• Volvo Penta D13C4-B MP

• Engine Family: D

⚙️ Key Features

• 1.39 kg
• Listed for 12 D series engine applications
• Cooling System group
• Supported by bracket 23465285, which covers the same 12 engines

🔌 Function

Carries raw seawater through the cooling circuit, from the intake side towards the heat exchanger and out to discharge.

⚠️ Common Signs of Failure

• Seawater weeping or dripping from a joint or along the pipe
• Salt crusting or green staining on the outside of the pipe
• Cooling performance falling as the bore silts up
• Pinholes appearing where the wall has thinned from inside
• Bore found scaled, pitted or partly blocked when the pipe is cut open

🛠️ Service Notes

• Seawater pipework corrodes from the inside out, so judge it by the bore rather than the outside appearance
• Renew the seals or hose ends at each joint, and check bracket 23465285 while the pipe is off
• Flush the raw water circuit and check the anodes at the same service

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging