23537713 Adjusting Washer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta adjusting washer 2.75 mm thick, weighing 0.036 kg and listed for 12 applications across D, DPH and DPI series engines and drives. Thickness is the entire specification - adjusting washers are selected by measurement, not by engine.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta DPH-E
• Volvo Penta DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G

• Engine Family: D, DPH, DPI
• HP Range: 150-440 HP

⚙️ Key Features

• 2.75 mm thick
• 0.036 kg
• Listed for 12 applications across D, DPH and DPI series engines and drives
• One of five thicknesses covering the same applications

🔌 Function

Sets the endfloat or preload of a shaft assembly by taking up a measured amount of the gap, so the bearings run with the clearance the build specification calls for.

⚠️ Common Signs of Failure

• Whine or rumble from the assembly that changes with load
• Perceptible play or knock in the shaft when it is rocked by hand
• Bearings running hot or discoloured
• Washer found bright, polished or picked up on one face
• Measured endfloat outside specification on check

🛠️ Service Notes

• Measure the clearance and select the thickness from the reading - these washers are chosen by measurement, not by engine type
• The neighbouring sizes are 2.80 mm (23537715), 3.15 mm (23537716), 3.20 mm (23537717) and 3.25 mm (23537718)
• Check the washer's faces and the bearing it works against before reusing anything from the old build

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging