23537715 Adjusting Washer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta adjusting washer 2.80 mm thick, weighing 0.018 kg and listed for 12 applications across D, DPH and DPI series engines and drives. Only 0.05 mm separates it from the 2.75 mm washer, so it must be measured rather than judged by eye.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta DPH-E
• Volvo Penta DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G

• Engine Family: D, DPH, DPI
• HP Range: 150-440 HP

⚙️ Key Features

• 2.80 mm thick
• 0.018 kg
• Listed for 12 applications across D, DPH and DPI series engines and drives
• Only 0.05 mm separates it from the 2.75 mm washer 23537713

🔌 Function

Sets the endfloat or preload of a shaft assembly by taking up a measured amount of the gap, so the bearings run to the specified clearance.

⚠️ Common Signs of Failure

• Whine or rumble that varies with load
• Play or knock felt when the shaft is rocked
• Bearing surfaces running hot or discoloured
• Washer picked up, polished or stepped on one face
• Endfloat measured outside the build tolerance

🛠️ Service Notes

• Measure the gap and select by the reading - a 0.05 mm step cannot be judged by eye
• Sizes either side are 2.75 mm (23537713) and 3.15 mm (23537716)
• Keep the washers separated and labelled while the job is open, since they are hard to tell apart once mixed

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging