23609177 Hose Clamp | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta hose clamp, securing a hose to its connection so the joint stays sealed under pressure and vibration. Retained clamping tension is what keeps the joint tight through heat cycles.

🚤 Compatibility

Typically suits:

• Volvo Penta 557
• Volvo Penta 627
• Volvo Penta 527
• Volvo Penta 577S
• Volvo Penta 627SV

⚙️ Key Features

• OEM Volvo Penta part number 23609177
• Net weight: 0.041 kg
• Quantity varies by assembly, most commonly 10

🔌 Function

The hose clamp applies even radial force around a hose end, pressing it onto its spigot so the joint seals and the hose cannot creep off under pressure.

⚠️ Common Signs of Failure

• Weeping or dripping at the hose connection
• Corrosion, pitting or a seized adjustment screw
• Loss of clamping tension so the hose can be turned by hand
• Distorted, stretched or cracked clamp band
• Hose bulging or creeping off the spigot

🛠️ Service Notes

• Match the clamp to the hose outside diameter so the band closes well within its working range rather than at the very end of its travel
• Position it over the spigot behind the bead or barb, with the screw where a driver or spanner can still reach it once everything is refitted
• Tighten to seal, not to crush — an over-tightened worm-drive clamp cuts into soft hose and starts the leak you were trying to stop
• Renew clamps when a hose is changed rather than reusing them, and keep band, housing and screw all marine-grade stainless so the clamp does not corrode against itself
• Where two clamps are fitted to one connection, stagger the screw heads and recheck both after the first running period

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging