23625965 Edge Protection | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta edge protection 100 mm long, weighing 0.010 kg and listed for nine D series engine applications. It shields a loom or hose from a sharp edge, so length must cover the exposed run.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-440I-G
• Volvo Penta D6-480I-G
• Volvo Penta D6-440I-WJ-G
• Volvo Penta D6-480I-WJ-G
• Volvo Penta D6-440D-G
• Volvo Penta D6-480D-G
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D6-480A-G

• Engine Family: D
• HP Range: 400-480 HP

⚙️ Key Features

• Edge protection, 100 mm long
• Engine group
• 0.010 kg
• Listed for nine D series engine applications
• L=100mm (Volvo assembly listing)
• Quantity varies by assembly, most commonly one

🔌 Function

Clips over a sharp panel or bracket edge so a loom or hose crossing it cannot be cut through by vibration.

⚠️ Common Signs of Failure

• Chafe mark on a loom or hose where the protection has slipped out of place
• Strip split, hardened or fallen off altogether
• Sharp edge left exposed with the protection missing
• Intermittent electrical fault traced to insulation worn through at an edge

🛠️ Service Notes

• The piece is 100 mm long, so check it covers the whole exposed run before fitting
• Inspect whatever crossed the edge for damage before refitting; a conductor already chafed will fail again

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging