23943782 Sealing Ring Kit | Genuine Volvo Penta Part

🔧 Product Description

A genuine matched sealing-ring service package for Volvo Penta IPS10-A and IPS10-B drive assemblies. It is intended for drive service where the specified seals must be renewed to maintain separation between lubricated internal components and the surrounding water. The individual sealing elements are supplied together under the complete kit number and are not represented here by unverified separate part numbers.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-300D-G
• Volvo Penta D6-340D-G
• Volvo Penta D6-380D-G
• Volvo Penta D6-440D-G
• Volvo Penta D6-480D-G
• Volvo Penta IPS10-A
• Volvo Penta IPS10-B

• Engine Family: D, IPS
• HP Range: 300-480 HP

⚙️ Key Features

• Genuine Volvo Penta IPS sealing package
• Confirmed for IPS10-A and IPS10-B applications
• Renews matched seals together during drive service
• Helps protect internal lubricated components
• Suitable for preventative overhaul or leakage repair

📋 Kit Contents

• 1 × matched IPS10 sealing-ring service set - Part Number: 23943782
• Individual sealing elements supplied under the complete kit number

🔌 Function

The sealing rings retain drive lubricant and prevent water, debris and contaminants from entering the corresponding IPS drive interfaces.

⚠️ Common Signs of Failure

• Drive-oil leakage
• Water or milky contamination in drive lubricant
• Visible seal hardening, cuts or distortion during overhaul
• Seal replacement following drive disassembly
• Repeated leakage at the serviced interface

🛠️ Service Notes

• Use every ring the kit supplies and replace them all in one go; leaving one original ring in place is the usual reason a rebuilt unit leaks again
• Lay the kit out against the parts you remove so each ring goes to the right joint, as kits often contain rings of very similar size
• Clean each groove and seat and check it for scoring, corrosion and old sealant before the new ring goes in
• Ease each ring into place without stretching, twisting or dragging it over sharp edges or threads, and check it is seated squarely before closing the joint
• Add no sealant unless the workshop manual for your engine calls for it, and tighten the joints to the figures in that manual

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging