24056195 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta cooling system bracket at 0.558 kg, listed for three D series engine applications.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C4-B MP
• Volvo Penta D13C5-B MP
• Volvo Penta D13C8-B MP

• Engine Family: D

⚙️ Key Features

• 0.558 kg
• Three D series engine applications
• Cooling system mounting

🔌 Function

Holds a cooling system component in position on the engine, carrying its weight and keeping it clear of neighbouring parts.

⚠️ Common Signs of Failure

• Rattle or movement from the mounted component
• Fixings loosening in service
• A crack starting at a bolt hole or a weld
• Mounting holes worn oval
• A hose or pipe found chafed where it rests on the bracket

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging