24355178 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Cables and Fuses group, weighing 0.311 kg and listed for seven D series engine applications. It supersedes part number 23839519.

🚤 Compatibility

Typically suits:

• Volvo Penta D11C2-A MP
• Volvo Penta D8A2-A MP
• Volvo Penta D11C4-A MP
• Volvo Penta D8A4-A MP
• Volvo Penta D8A3-A MP
• Volvo Penta D8A7-A MP
• Volvo Penta D8A8-A MP

• Engine Family: D

⚙️ Key Features

• 0.311 kg
• Supersedes 23839519
• Seven D series engine applications

🔌 Function

Holds a cable or electrical component in its designed position.

⚠️ Common Signs of Failure

• Cracking at the mounting holes
• Fixings loosened by vibration
• Chafe marks on the cable it retains
• Corrosion at the joint faces

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 24355178 → Supersedes 23839519

OEM / Related Numbers

• 23839519 earlier number superseded by this part

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging