24367829 Oil Strainer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta oil strainer, part number 24367829, listed in the Lubricating and Oil System group. It separates contamination out of the fluid passing through it, protecting the components downstream from the debris and water that would otherwise reach them. Volvo Penta publishes no fitment, dimensions or assembly detail against this number, so check it against the parts list for your own engine before ordering.

⚙️ Key Features

• Genuine Volvo Penta oil strainer
• Lubricating and Oil System group
• Protects downstream components from contamination
• No fitment or dimensions published against this number — check it against the parts list for your engine

🔌 Function

Separates contamination out of the fluid passing through it, protecting the components downstream from the debris and water that would otherwise reach them.

⚠️ Common Signs of Failure

• Low oil pressure, slow to build, or falling away at idle or when the boat is heeled
• Oil pressure warning or alarm with the correct grade and level of oil in the sump
• Mesh found blocked with sludge, varnish or debris when the sump is opened
• Noisy valve gear or a bearing rumble from oil starvation

🛠️ Service Notes

• Clean or renew the strainer whenever the sump is off, washing it through with clean solvent rather than poking at it — a damaged mesh passes debris straight to the pump
• Look at what the old strainer has caught before you discard it; metal or bearing material means the real cause has not been found yet
• Fit new gaskets, seals or sealing washers on the suction pipe joints, as an air leak on the suction side loses oil pressure even with a sound pump
• Set the strainer at the position and orientation the manual specifies, clear of the sump floor and any baffle plate
• Prime the system and confirm oil pressure builds properly before putting any load on the engine

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging