24590888 Engine Mounting | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta engine mounting, part number 24590888, listed in the Engine group. It carries the weight of the engine and isolates its vibration from the hull, while holding the engine in the alignment the driveline is set to. Volvo Penta publishes no fitment, dimensions or assembly detail against this number, so check it against the parts list for your own engine before ordering.

⚙️ Key Features

• Genuine Volvo Penta engine mounting
• Engine group
• Carries engine weight and isolates vibration
• No fitment or dimensions published against this number — check it against the parts list for your engine

🔌 Function

Carries the weight of the engine and isolates its vibration from the hull, while holding the engine in the alignment the driveline is set to.

⚠️ Common Signs of Failure

• Rubber cracked, split, bulging or parted from its metal base, or the mount visibly collapsed so the engine sits lower on one corner
• Rubber soft, swollen and shiny from oil or fuel contamination
• Noticeably more vibration than before, or a thump or knock from the engine feet when taking up drive or changing direction
• Alignment drifting out between checks, or a coupling and shaft showing signs of being worked
• Studs, through-bolts or adjusting threads corroded, bent or broken, and the engine able to be rocked by hand at that foot

🛠️ Service Notes

• Renew mounts as a set rather than singly, so the engine sits on rubber of matched condition and stiffness
• Take the load off the mounts with proper support before undoing anything, and keep the engine level as it is lowered onto the new ones so each foot lands flat with no gap under it
• Let the engine stand on the new mounts so the rubber can settle before setting the final alignment; aligning straight away gives a reading that changes as soon as the elastomer compresses
• Set the shaft or coupling alignment to the method and limits in the workshop manual for your engine, and check the mounts share the load rather than one being wound down hard to make the figures
• Recheck the alignment and the mount locknuts after the first period of running, and keep oil, fuel and coolant off the rubber — contamination softens and swells it

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging