24777464 Oil Cooler | Genuine Volvo Penta Part
24777464 Oil Cooler | Genuine Volvo Penta Part
Couldn't load pickup availability
Available on request — contact us
As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta oil cooler, part number 24777464, listed in the Lubricating and Oil System group. It transfers heat out of the fluid or air passing through it into the cooling circuit, keeping the temperature within the range the engine is designed to run at. Volvo Penta publishes no fitment, dimensions or assembly detail against this number, so check it against the parts list for your own engine before ordering.
⚙️ Key Features
- Genuine Volvo Penta oil cooler
- Lubricating and Oil System group
- Heat exchanger within the cooling circuit
- No fitment or dimensions published against this number — check it against the parts list for your engine
🔌 Function
Transfers heat out of the fluid or air passing through it into the cooling circuit, keeping the temperature within the range the engine is designed to run at.
⚠️ Common Signs of Failure
- Water or coolant in the oil, or oil in the coolant — a milky, emulsified dipstick, a creamy film in the header tank or oil on the coolant surface
- Oil temperature running high, oil thinning off, or oil pressure falling away once the engine is hot
- Weeping, salt trails or verdigris around the cooler joints and end covers
- Visible corrosion, blistering or blocked passages on the raw water side of the unit
🛠️ Service Notes
- Fit new O-rings, seals and gaskets throughout, lubricated lightly with clean oil so they seat rather than roll, and clean both mating faces first
- After a cooler that has leaked internally, change the engine oil and filter and flush the oil side — water or coolant contaminated oil must not be left in the engine
- Deal with the cause on the raw water side as well: clean the strainer and hoses, check the sea water pump impeller for missing vanes, and check the anodes where the installation has them
- A cooler being reused or investigated can be pressure tested on the water side to confirm whether it is sound before it goes back on
- Refill and bleed the oil and cooling systems, run the engine and then recheck every joint once hot, when the seals are at working temperature and pressure
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
