3094432 Adjusting Washer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta adjusting washer 1.44 mm thick, from the Fuel System group, weighing 0.002 kg and listed for 11 applications across D and TAD series engines.

🚤 Compatibility

Typically suits:

• Volvo Penta D12C-A MP
• Volvo Penta D12D-A MH
• Volvo Penta D12D-A MP
• Volvo Penta D12D-B MH
• Volvo Penta D12D-C MH
• Volvo Penta D12D-C MP
• Volvo Penta D12D-E MH
• Volvo Penta D12D-G MH
• Volvo Penta TAD1241GE
• Volvo Penta TAD1242GE
• Volvo Penta TAD1240GE

• Engine Family: D, TAD

⚙️ Key Features

• 1.44 mm thickness
• 11 applications across D and TAD series engines

🔌 Function

Sets injection pump clearance by its measured thickness.

⚠️ Common Signs of Failure

• Timing outside specification
• Washer deformed
• Uneven running
• Seating wear

🛠️ Service Notes

• An adjusting washer is a precision-thickness shim: the correct one is whichever thickness gives the dimension called for in the workshop manual, so it is chosen by measurement rather than by simply matching what came out
• Measure the washer itself with a micrometer before fitting — thickness is the whole function, and markings or part numbers are no substitute for a measured figure
• Do not reuse a washer that is dished, indented, scored or corroded; a shim that has been distorted under clamp load will not restore the original setting
• Clean the seat and the washer of oil, old sealant and burrs so the stack sits dead flat — a trapped burr is thicker than the tolerance you are shimming to
• Where washers are refitted rather than renewed, keep each one with the component and position it came from, and record the thickness used so the setting can be reproduced later

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging