3161224 Pipe | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta pipe weighing 0.177 kg and listed for 11 applications across D and TAD series engines.

🚤 Compatibility

Typically suits:

• Volvo Penta D9A2L MH
• Volvo Penta D9A2A
• Volvo Penta TAD943VE
• Volvo Penta TAD952VE
• Volvo Penta TAD951VE
• Volvo Penta TAD950VE
• Volvo Penta TAD940GE
• Volvo Penta TAD940VE
• Volvo Penta TAD941VE
• Volvo Penta TAD941GE
• Volvo Penta TAD942VE

• Engine Family: D, TAD

⚙️ Key Features

• 0.177 kg
• 11 applications across D and TAD series engines

🔌 Function

Carries fluid between two points in the system it serves.

⚠️ Common Signs of Failure

• Leakage at the connections
• Internal corrosion thinning the wall
• Chafing or cracking at a clamping point
• Restricted bore reducing flow

🛠️ Service Notes

• Offer the pipe up and check it reaches both connections freely before you tighten anything — a rigid pipe pulled into place is a pipe left under permanent strain, and strained pipes crack at the fittings in service
• Renew the sealing washers, O-rings or union seals that go with the pipe rather than reusing the old ones, and make sure the seats, faces and threads are clean
• Keep the ends capped while you work and blow or flush a pipe through before fitting; anything left inside goes straight into the oil, fuel or coolant system
• Tighten unions and banjo bolts evenly to the figures in the workshop manual for your engine — overtightening distorts the seat and starts the leak you were trying to cure
• Refit every clip and support bracket in its original place and keep the pipe clear of hot or moving parts so it cannot chafe or be shaken to failure

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging