3581336 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Marine Propulsion group, weighing 0.569 kg and listed for five applications across TMD, TAMD and KAMD series engines.

🚤 Compatibility

Typically suits:

• Volvo Penta TMD41L-A
• Volvo Penta TAMD41H-A
• Volvo Penta TAMD41P-A
• Volvo Penta TAMD41P
• Volvo Penta KAMD42P-A

• Engine Family: TMD, TAMD, KAMD

⚙️ Key Features

• 0.569 kg
• Five applications across TMD, TAMD and KAMD series engines

🔌 Function

Holds a propulsion system component in its designed position.

⚠️ Common Signs of Failure

• Cracking at the mounting holes
• Corrosion where dissimilar metals meet
• Fixing holes worn oversize
• The supported component out of alignment

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging