3586879 Thrust Bearing | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta thrust bearing, 0.25 mm oversize, from the Engine group, weighing 0.318 kg and listed for 17 D series applications.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-340I-G
• Volvo Penta D6-380I-G
• Volvo Penta D6-440I-G
• Volvo Penta D6-480I-G
• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta D6-440I-WJ-G
• Volvo Penta D6-480I-WJ-G
• Volvo Penta D6-300D-G
• Volvo Penta D6-340D-G
• Volvo Penta D6-380D-G
• Volvo Penta D6-440D-G
• Volvo Penta D6-480D-G
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D6-300I-G

• Engine Family: D
• HP Range: 300-480 HP

⚙️ Key Features

• 0.25 mm oversize
• 0.318 kg
• 17 D series applications
• Engine group
• 0.25mm (Volvo assembly listing)

🔌 Function

Takes the crankshaft's endwise load and sets its end float.

⚠️ Common Signs of Failure

• Crankshaft end float measuring over specification
• Knock or thump felt when the clutch or drive loads up
• Fore and aft movement visible at the crankshaft pulley
• Thrust faces scored, wiped or worn stepped
• Bearing metal in the oil or the filter

🛠️ Service Notes

• The three thrust sizes here are this 0.25 mm part, 3586880 at 0.50 mm and 3586881 at 0.75 mm; only about 8 grams separate one step from the next, so the oversize figure is the only reliable guide
• Fit the thrust size that matches the main bearing kit - 3586873 is the 0.25 mm main kit
• Measure end float after assembly and before the sump goes back on

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging