3829866 Hose | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta hose from the Cooling System group, weighing 3.81 kg and listed for 42 applications on D series engines. Hose 3819574 sits only 10 grams away at 3.8 kg, so weight will not separate the two.

🚤 Compatibility

• Engine Family: D

Full model list at the end of this description.

⚙️ Key Features

• 3.81 kg
• 42 applications on D series engines
• Only 10 grams from hose 3819574 at 3.8 kg
• Cooling System group

🔌 Function

Carries coolant on a flexible run between two points in the circuit, absorbing engine movement that a rigid pipe could not.

⚠️ Common Signs of Failure

• Soft, spongy or swollen feel when squeezed cold
• Coolant weeping at the clip lands, often crusted white or green
• Surface cracks and crazing, especially near the ends
• Ballooning under pressure or collapsing on the suction side
• Rubber gone hard and glazed, so the clips no longer bite

🛠️ Service Notes

• Hose 3819574 at 3.8 kg carries no published fitment list, so use the D series application rather than the weight to choose between them
• Renew the hose clips with the hose and retighten once the engine has been up to temperature and cooled again
• Check the pipe stubs for corrosion and scale where the hose seals, a rough stub will cut a new hose

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13B-E MG, D13B-E MG (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13C4-B MP, D13C5-B MP, D13C1-A MH, D13C2-A MH, D13C1-B MG, D13C3-B MG, D13C2-B MG, D13C4-B MG, D13C2-A MG, D13C1-A MG, D13C8-B MP
• Volvo Penta D16C-A MG, D16C-C MH, D16C1-E MG, D16C1-F MG, D16C2-E MG, D16C2-F MG, D16C-D MH, D16C1-E MH, D16C1-F MH, D16C2-E MH, D16C2-F MH
• Volvo Penta D8A5-A MH, D8A6-A MH, D8A5-A MG, D8A6-A MG, D8A3-A MP
• Volvo Penta D5A-B TA, D5A-T
• Volvo Penta D7A-B TA, D7A-T
• Volvo Penta D9A2A, D9A2C