3830176 Sleeve | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta sleeve from the Lubricating and Oil System group, weighing 0.072 kg and listed for 51 applications across D, TAMD and MD series engines.

🚤 Compatibility

• Engine Family: D, TAMD, MD

Full model list at the end of this description.

⚙️ Key Features

• 0.072 kg
• 51 applications across D, TAMD and MD engines
• Oil system bore sleeve

🔌 Function

Lines or spaces a bore in the oil system, giving a controlled bearing or sealing surface and setting the position of the part running in it.

⚠️ Common Signs of Failure

• Play or knock at the component the sleeve supports
• Bore worn oval, scored or stepped
• Oil pressure lower than expected past the joint
• Bright metallic debris in the oil or filter
• Sleeve found spun, cracked or displaced in its housing

🛠️ Service Notes

• Dowel 3830181 is listed for the same 51 applications and locates in the same assembly — fit the two together
• Check the shaft or plunger running in the sleeve for matching wear before reusing it
• Clean the housing bore thoroughly; grit trapped behind a sleeve will distort it as it beds

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13C1-A MH, D13C2-A MH, D13C1-B MG, D13C3-B MG, D13C2-B MG, D13C4-B MG, D13C2-A MG, D13C1-A MG
• Volvo Penta D16C-A MG, D16C-A MH, D16C-B MH, D16C-C MH, D16C1-E MG, D16C1-F MG, D16C2-E MG, D16C2-F MG, D16C-D MH, D16C1-E MH, D16C1-F MH, D16C2-E MH, D16C2-F MH
• Volvo Penta D8A5-A MH, D8A6-A MH, D8A5-A MG, D8A6-A MG
• Volvo Penta D5A-B TA, D5A-T, D5A-TA
• Volvo Penta D7A-B TA, D7A-T, D7A-TA
• Volvo Penta D9A2L MH, D9A2A, D9A2C
• Volvo Penta D12D-A MG, D12D-E MG
• Volvo Penta MD2010, MD2010B
• Volvo Penta TAMD103A
• Volvo Penta TAMD74A