3853449 Tube | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta tube from the Marine Propulsion group, weighing 0.091 kg and listed for 19 applications across TSK, TMD, SX, TAMD and MD series - a list that spans both sterndrive hardware and the diesel engine families, which is unusual for a drive-side part.

🚤 Compatibility

Typically suits:

• Volvo Penta TSK SX-C
• Volvo Penta TSK SX-C1
• Volvo Penta TSK SX-C1AC
• Volvo Penta TSK SX-C2AC
• Volvo Penta TSK SX-CLT M10
• Volvo Penta TSK SX-CLT1
• Volvo Penta TSK SX-M
• Volvo Penta TSK SX-MACLT
• Volvo Penta TSK SX-MLT
• Volvo Penta TSK SX-R
• Volvo Penta TSK SX-R1
• Volvo Penta TSK SX-R2
• Volvo Penta TSK SX-S
• Volvo Penta TSK SX-SLT
• Volvo Penta TMD22B
• Volvo Penta SX-S
• Volvo Penta SX-ST
• Volvo Penta TAMD22P-B
• Volvo Penta MD22L

• Engine Family: TSK, TMD, SX, TAMD, MD

⚙️ Key Features

• 0.091 kg
• Marine Propulsion group
• 19 applications across TSK, TMD, SX, TAMD and MD series
• Spans both drive hardware and diesel engine families

🔌 Function

Carries fluid, air or a cable run between two points, holding the route and the clearances the installation was designed around.

⚠️ Common Signs of Failure

• Weep, drip or staining along the tube run
• Tube chafed thin where it touches a bracket or hose
• Kink or flat spot restricting flow
• End fitting or flare cracked at the joint
• Corrosion pitting, worst where the tube is clipped

🛠️ Service Notes

• Renew the sealing at each end and refit the tube in its original clips - an unsupported tube chafes through in a season
• Bolt 3853501 and clamp 3853535 are also published at 0.091 kg, so order by number

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging