3859027 Stud | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta stud from the Engine group, weighing 0.005 kg and listed for 51 applications on the V series - the same application group as vibration damper 3859022 and woodruff key 3859024, so it belongs to that front-end assembly.

🚤 Compatibility

• Engine Family: V
• HP Range: 200-225 HP

Full model list at the end of this description.

⚙️ Key Features

• 0.005 kg
• 51 applications on the V series
• Part of the same group as vibration damper 3859022
• Engine group

🔌 Function

Screws permanently into a casting to provide a fixed threaded spigot, so the mating part can be located and clamped with a nut without repeatedly cutting the casting threads.

⚠️ Common Signs of Failure

• Stud pulling out of the casting with its nut still tight
• Casting threads stripped, crossed or pulled
• Stud corroded, seized or snapping on removal
• Joint slackening and weeping as clamp load is lost
• Exposed thread pitted so the nut will not run freely

🛠️ Service Notes

• Clean and check the casting threads before driving a new stud and set it to the correct standing height
• Renew the nut and any washer with the stud rather than reusing corroded hardware

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta 4.3OSi-GF, 4.3OSi-J, 4.3OSi-JF, 4.3Gi-200-R, 4.3GL-A, 4.3GL-B, 4.3GL-C, 4.3GL-D, 4.3GL-E, 4.3GL-EF, 4.3GL-G, 4.3GL-GF, 4.3GL-J, 4.3GL-JF, 4.3GL-P, 4.3GXi-225-R, 4.3GXiE-225-R, 4.3GXi-A, 4.3GXi-B, 4.3GXi-BF, 4.3GXi-C, 4.3GXi-CF, 4.3GXi-D, 4.3GXi-DF, 4.3GXi-E, 4.3GXi-EF, 4.3GXiE-M, 4.3GXi-P, 4.3GXiE-P, 4.3GXi-Q, 4.3GXiE-Q, 4.3GXi-F, 4.3GXi-FF, 4.3GXi-G, 4.3GXi-GF, 4.3GXi-J, 4.3GXi-JF, 4.3OSi-BF, 4.3OSi-B, 4.3OSi-C, 4.3OSi-CF, 4.3OSi-D, 4.3OSi-DF, 4.3OSi-E, 4.3OSi-EF, 4.3OSi-F, 4.3OSi-FF, 4.3OSi-G
• Volvo Penta V6-200-A, V6-225-A, V6-225-E-A