3860751 Stud | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta stud from the Fuel System group, weighing 0.029 kg and listed for 16 applications - the same fitment breadth as the spacer 3860750, which it works alongside.

🚤 Compatibility

Typically suits:

• Volvo Penta 3.0GLM-A
• Volvo Penta 3.0GLM-B
• Volvo Penta 3.0GLM-C
• Volvo Penta 3.0GLP-A
• Volvo Penta 3.0GLP-B
• Volvo Penta 3.0GLP-C
• Volvo Penta 3.0GLP-D
• Volvo Penta 3.0GLP-E
• Volvo Penta 3.0GLP-J
• Volvo Penta 3.0GLP-N
• Volvo Penta 3.0GSM-A
• Volvo Penta 3.0GSM-B
• Volvo Penta 3.0GSM-C
• Volvo Penta 3.0GSP-A
• Volvo Penta 3.0GSP-B
• Volvo Penta 3.0GSP-C

⚙️ Key Features

• Fuel System group
• 0.029 kg
• Listed for 16 applications
• Same fitment breadth as spacer 3860750
• 4 used per assembly

🔌 Function

Provides a permanent threaded anchor in the casting so the component can be lifted on and off without cutting a thread each time.

⚠️ Common Signs of Failure

• Nut will not pull down to torque, or the stud turns with it
• Stud snapped off flush with the casting
• Thread stripped, stretched or necked down
• Corrosion built up under the nut, seizing the two together
• Joint leaking because that stud has lost its clamp

🛠️ Service Notes

• Two studs at 0.029 kg and 0.020 kg appear in this group - 3860812 is the lighter and shorter - so check the length needed before ordering
• Wind a stud into a clean, dry thread and set it to its shoulder rather than torquing it by the nut

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging