3863065 Adjusting Washer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta adjusting washer 3.00 mm thick, weighing 0.014 kg and listed for 20 applications across the DPH, D and DPI families. It is the third step in the graded set with 3863063 at 2.85 mm, 3863064 at 2.90 mm and 3863066 at 3.05 mm, and the published weights run out of order across that set, so the thickness figure is the only safe way to order.

🚤 Compatibility

Typically suits:

• Volvo Penta DPH-D1
• Volvo Penta D6-330A-F
• Volvo Penta D6-370A-F
• Volvo Penta D4-260A-F
• Volvo Penta D4-300A-F
• Volvo Penta D6-300A-F
• Volvo Penta D4-225A-F
• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta DPH-E
• Volvo Penta DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D6-400A-F
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G

• Engine Family: DPH, D, DPI
• HP Range: 150-440 HP

⚙️ Key Features

• 3.00 mm thick
• 20 applications across the DPH, D and DPI families
• Graded siblings 3863063, 3863064 and 3863066 at 2.85, 2.90 and 3.05 mm
• Published weights run out of order across the set

🔌 Function

Sets the shim thickness in a stack so the clearance or preload of the assembly falls where it should.

⚠️ Common Signs of Failure

• Clearance or preload out of specification after assembly
• Washer dished, indented or brinelled
• Bright rub marks from turning in the stack
• Backlash reappearing after a rebuild

🛠️ Service Notes

• Measure before ordering — the steps between grades are 0.05 to 0.10 mm
• Keep grades bagged and labelled during the strip so they cannot be mixed

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging