3885452 Volvo Penta 5.7L ECU | Genuine Used Part

🔧 Product Description

Genuine Volvo Penta 5.7L ECU / Engine Control Module - Part Number: 3885452

A genuine Volvo Penta electronic engine control module used on selected 5.7L GM-based petrol marine engines. This ECU manages fuel delivery, ignition control, sensor inputs and engine protection strategy for compatible Volvo Penta 5.7Gi, 5.7GXi, 5.7OSi and 5.7OSXi applications using the 3885452 module calibration family.

⚙️ Key Features

• Genuine Volvo Penta ECU / module

• Correct Volvo Penta part number 3885452

• Used in Volvo Penta electronic engine control systems

• Suits selected 5.7L GM V8 petrol applications in the G / H generation family

• Critical engine-management component requiring exact part number and engine-serial confirmation before fitting

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 3885452 current Volvo Penta module reference

OEM / Related Numbers:

• 3885452

• Volvo Penta Module 3885452

• Related ECU mounting bracket reference: 3817811

• Related flange screw reference: 3843651

• Related engine control sensor reference: 3859020

• Related engine control sensor reference: 3858979

• Related knock sensor update reference: 22024631

• Earlier knock sensor reference: 3850357

Aftermarket / Verified Equivalents:

• No aftermarket equivalent

🚤 Compatibility

Commonly used on:

• Volvo Penta 5.7L GM-based petrol sterndrive and inboard electronic engine control systems

Typically suits:

• Engine models:

• Volvo Penta 5.7Gi-G

• Volvo Penta 5.7Gi-GF

• Volvo Penta 5.7GXi-H

• Volvo Penta 5.7GXi-HF

• Volvo Penta 5.7OSi-G

• Volvo Penta 5.7OSi-GF

• Volvo Penta 5.7OSXi-G

• Volvo Penta 5.7OSXi-GF

• HP Range: commonly 280HP - 320HP depending on exact 5.7L calibration

• Engine Type: Volvo Penta GM-based 5.7L V8 petrol EFI / MPI marine engine

• Year Range: approximately 2005 - 2007 generation depending on engine model and serial number

• Serial / Calibration Note: ECU fitment must be matched by exact Volvo Penta engine model, engine serial number and installed software/calibration family before installation.

🔌 Function

The ECU is the main engine-management module. It receives signals from the crank, throttle, temperature, knock, MAP, oil-pressure and other engine sensors, then controls fuel injection, ignition timing, idle strategy, guardian functions and diagnostic fault storage.

Common signs of failure:

• No-start condition with correct fuel pressure and ignition inputs

• No communication with diagnostic equipment

• Intermittent stalling or loss of injector pulse

• Engine running excessively rich or lean despite correct sensor inputs

• Fault codes that return after wiring, sensor and power-supply checks

• Ignition or fuel-control faults isolated to the ECU after testing

• Poor idle quality or limp-mode operation caused by internal module failure

📦 Condition

• Genuine used part

• Removed from running engine where applicable

• In good working condition unless otherwise stated