5010744 Evinrude Johnson Pump Assy Fuel | Genuine OEM BRP Outboard Part

🔧 Product Description

Genuine BRP E-TEC Fuel Lift Pump Assembly - Part Number: 5010744

A genuine BRP fuel lift-pump assembly for selected Evinrude E-TEC direct-injection outboard motors. The pump draws fuel from the boat's fuel tank and supplies it to the engine-mounted fuel filter and vapour-separator reservoir.

This assembly replaces BRP part number 5007727 and is used on selected 60-degree V4 and V6 E-TEC engines.

⚙️ Key Features

• Genuine BRP OEM fuel lift-pump assembly

• Correct Evinrude part number 5010744

• Supersedes earlier fuel pump 5007727

• Supplies the engine-mounted fuel filter and vapour separator

• Designed for selected 115HP to 200HP E-TEC outboards

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 5010744 → Supersedes 5007727

• 5007727 earlier OEM fuel lift-pump assembly

OEM / Related Numbers:

• 5010744

• 5007727

• 5007727-1

• 5010744-1

• 50107441

Aftermarket / Verified Equivalents:

• DAM Marine: DM_MA_5007727

• Aftermarket Fuel Pump Assembly: 5007727 / 5010744

🚤 Compatibility

Commonly used on:

• Evinrude E-TEC 60-degree V4 and V6 low-pressure fuel systems

• Engine-mounted fuel filter and vapour-separator supply circuits

Typically suits:

• Engine models:

• Evinrude E-TEC 115HP - including 2010 E115DBXISM

• Evinrude E-TEC 115 H.O. - selected model codes

• Evinrude E-TEC 130HP - selected model codes

• Evinrude E-TEC 135 H.O. - selected model codes

• Evinrude E-TEC 150HP - including 2009 E150DBXSEA

• Evinrude E-TEC 150HP - including 2010 E150DBXISF

• Evinrude E-TEC 150HP AA-series - including E150DCXAAA

• Evinrude E-TEC 150HP AB-series - including E150HGLABB

• Evinrude E-TEC 150 H.O. - selected model codes

• Evinrude E-TEC 175HP - selected 60-degree V6 models

• Evinrude E-TEC 200HP - selected 60-degree V6 models

• HP Range: 115HP - 200HP

• Engine Type: Evinrude E-TEC 60-degree V4 and V6 direct-injection two-stroke outboard

• Year Range: Approximately 2009-2012

🔌 Function

The lift pump creates the low-pressure fuel supply required to move petrol from the boat tank through the engine filter and into the vapour separator. The high-pressure electric pump inside the vapour separator then supplies the injectors.

Common signs of failure:

• Extended cranking before the engine starts

• Engine stalls when accelerating or operating under load

• Primer bulb does not remain firm

• Low fuel pressure at the vapour-separator inlet

• Engine runs briefly after manually priming, then stops

• Fuel leakage, cracked pump fittings or damaged diaphragm

• Lean-running or fuel-supply fault codes

📦 Condition

• Genuine BRP part

• Brand new

• Supplied in original or equivalent packaging