5011090 Evinrude Johnson Fuel Filter | Genuine OEM BRP Outboard Part

🔧 Product Description

Genuine BRP Engine-Mounted Fuel Filter - Part Number: 5011090

A genuine BRP replacement fuel filter for selected Evinrude E-TEC outboard motors. The filter removes fine contamination and water-borne debris from the petrol supply before fuel reaches the lift pump, vapour separator and high-pressure injection system.

Part number 5011090 supersedes BRP filter 5009676 and cross-references with earlier OMC, Johnson, Evinrude and Volvo Penta filter numbers using the same service specification.

⚙️ Key Features

• Genuine BRP OEM engine-mounted fuel filter

• Correct Evinrude / Johnson part number 5011090

• Supersedes earlier BRP filter 5009676

• Protects the vapour separator, electric pump and injectors

• Cross-references with Sierra and Recmar replacement filters

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 5011090 → Supersedes 5009676

• 5009676 earlier OEM fuel-filter reference

OEM / Related Numbers:

• 5011090

• 5009676

• 0502906

• 502906

• 0777713

• 777713

• 0987754

• 987754

• 2011090

• Volvo Penta: 3852413

• Volvo Penta: 3851218-2

• Volvo Penta: 3862228

Aftermarket / Verified Equivalents:

• Sierra: 18-7789

• Recmar: REC502906

• Aftermarket Fuel Filter: 502906

• Volvo Penta Replacement: 3852413 / 3862228

🚤 Compatibility

Commonly used on:

• Evinrude E-TEC engine-mounted fuel-filter systems

• BRP direct-injection fuel systems requiring filter 5009676 / 5011090

• Compatible OMC and Volvo Penta petrol fuel-filter applications using the related filter family

Typically suits:

• Engine models:

• Evinrude E-TEC 115HP

• Evinrude E-TEC 115 H.O.

• Evinrude E-TEC 130HP - including 2010 E130 models

• Evinrude E-TEC 135 H.O.

• Evinrude E-TEC 150HP

• Evinrude E-TEC 150 H.O.

• Evinrude E-TEC 175HP

• Evinrude E-TEC 200HP

• Evinrude E-TEC 200 H.O.

• Evinrude E-TEC 225HP

• Evinrude E-TEC 225 H.O.

• Evinrude E-TEC 250HP

• Evinrude E-TEC 250 H.O.

• Evinrude E-TEC 300HP

• Evinrude E-TEC G2 engines whose fuel-system diagram specifies 5011090

• HP Range: 115HP - 300HP

• Engine Type: Evinrude E-TEC and E-TEC G2 direct-injection two-stroke outboard

• Year Range: Approximately 2008-2020, dependent on fuel-system configuration

🔌 Function

The filter captures rust, dirt, tank residue and other contamination before fuel enters the precision lift-pump, vapour-separator and injector components.

Common signs of failure:

• Engine loses power under load

• Extended cranking or difficult starting

• Fuel pressure falls as engine speed increases

• Engine runs normally at idle but stalls during acceleration

• Filter contains visible water, rust or dark contamination

• Primer bulb collapses because of restricted fuel flow

• Lean-running or fuel-delivery fault codes

📦 Condition

• Genuine BRP part

• Brand new

• Supplied in original or equivalent packaging