60112735 Spacer Sleeve | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta spacer sleeve weighing 0.202 kg and listed for 22 fitments across TAD and TWD series engines. At 0.202 kg it is by an order of magnitude the largest item in this hardware group, so it is a machined sleeve rather than a thin spacing shim.

🚤 Compatibility

• Engine Family: TAD, TWD

Full model list at the end of this description.

⚙️ Key Features

• 0.202 kg
• 22 fitments across TAD and TWD series engines
• Largest single item in this hardware group

🔌 Function

Sets and holds the gap between two components so the bolt through it clamps to the correct length without crushing what it passes through.

⚠️ Common Signs of Failure

• Ends fretted or hammered where they bear on the mating faces
• Sleeve crushed or ovalised so the bracket no longer sits square
• Bore worn where the bolt passes through, giving side play
• Corrosion pitting along the outside
• Mounting working loose again shortly after being torqued

🛠️ Service Notes

• Renew the bolt and any lock nut at the same time, as a sleeve that has been crushed usually means the fastener has been overtightened
• Measure the old sleeve before fitting - length is what sets the clamp, so a substituted sleeve of the wrong length will not hold torque

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta TAD1640-42GE-B, TAD1640GE, TAD1640VE-B
• Volvo Penta TAD1641VE-B, TAD1641GE, TAD1641VE
• Volvo Penta TAD1642VE-B, TAD1642GE, TAD1642VE
• Volvo Penta TAD1650VE-B/51VE, TAD1650GE, TAD1650VE
• Volvo Penta TAD1643VE-B, TAD1643VE
• Volvo Penta TAD1651GE
• Volvo Penta TAD1660-62VE
• Volvo Penta TAD1662VE EU5
• Volvo Penta TAD1670-72VE
• Volvo Penta TWD1643GE
• Volvo Penta TWD1652GE
• Volvo Penta TWD1653GE
• Volvo Penta TWD1663GE