60113364 Washer | Genuine Volvo Penta Part
60113364 Washer | Genuine Volvo Penta Part
Couldn't load pickup availability
Available on request — contact us
As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta washer, published at 0.008 kg. Because no source states its diameter or whether it is a plain, sealing or locking washer, match it against the one you removed — the three types are not interchangeable, and a sealing washer on a fuel or oil union should be renewed rather than reused.
⚙️ Key Features
- Genuine Volvo Penta washer, part number 60113364
- Listed weight approximately 0.008 kg
- Type not stated — plain, sealing and locking washers are not interchangeable, so match the one removed
- If it is a sealing washer on a fuel or oil union, treat it as single-use
- Category: Fasteners and Fixings
🔌 Function
Fits beneath a fastener head or nut, or onto a fuel, oil or coolant union, to spread clamping load, protect the mating face, or complete a seal, depending on which type is fitted.
⚠️ Common Signs of Failure
- A fuel, oil or coolant union that keeps weeping or seeping and will not stop when the fitting is retightened
- A fastener that will not hold its torque or works loose repeatedly in service
- Washers found crushed, dished, cracked or with a permanent set when the joint is disturbed
- Corrosion, pitting or heat discoloration on the washer or a witness stain of leaked fluid tracking away from the joint
🛠️ Service Notes
- Check you are fitting the same type of washer that came out — plain, hardened, sealing and locking washers are not interchangeable, and the wrong one either fails to seal or fails to hold
- Treat sealing washers on fuel, oil and coolant unions as single-use; they seal by deforming onto the faces, so a used one will not seal reliably a second time
- Clean the seating faces and make sure the washer sits flat and square, fully under the head or nut, before tightening — a washer trapped on a chamfer or edge will crush unevenly
- Tighten the fastener to the figure given in the workshop manual for your engine, and account for every washer on reassembly so none is left loose inside a housing or the engine bay
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
