60113716 Flange Screw | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta flange screw, published at 0.093 kg. The integral flange forms the bearing face, so it should seat directly on a clean, undamaged surface without an added washer unless the workshop manual for your engine calls for one. Check the thread size and length against the screw you removed before ordering.

⚙️ Key Features

• Genuine Volvo Penta flange screw, part number 60113716
• Listed weight approximately 0.093 kg
• Integral flange forms the bearing face — no separate washer needed unless the workshop manual calls for one
• Thread size and length must be matched against the screw removed
• Category: Fasteners and Fixings

🔌 Function

A threaded fastener with an integral flange that clamps a component while the flange face itself bears against the mating surface.

⚠️ Common Signs of Failure

• Weeping or blowing from the joint the screw secures, or a component that has worked loose against its mounting face
• Screws found finger-loose or backed out, with witness marks or polishing under the flange showing movement
• Corroded or seized heads that will not release cleanly, or a screw that snaps on removal
• A stripped, rounded or damaged head, or a flange that has dished, cracked or lost its serrations

🛠️ Service Notes

• The integral flange spreads the load and forms the bearing face, so do not add a separate washer unless the workshop manual for your engine specifically calls for one
• Clean the threads and the seating face before fitting — grit, paint or old sealant under the flange gives a false torque reading and the joint will slacken off in service
• Where the flange is serrated it must bear directly on clean metal to grip; discard any screw with a deformed flange or damaged serrations rather than reusing it
• Tighten to the torque and sequence given in the workshop manual for your engine, and treat the screw as single-use where the manual specifies an angle-tightened or stretch fastener
• Check the thread in the receiving component at the same time; a pulled or corroded thread will not hold a new screw however carefully it is torqued

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging