63P-13907-03 Aftermarket Mercury/Suzuki Fuel Pump DF70A, DF80A, DF90A | Sawley's Select Marine Parts

🔧 Product Description

Aftermarket replacement In-Tank High-Pressure EFI Fuel Pump - Replaces Part Number: 63P-13907-03

New aftermarket high-pressure electric EFI fuel pump replacing 63P-13907-03. It is configured for F150A/F150B and LF150 model families, F150 four-stroke outboards from the early EFI production through later 63P revisions. The exact engine model, serial range, fuel pressure and connection layout must match the original installation.

⚙️ Key Features

• Direct replacement for the 63P-13907-03 service family

• Designed for Yamaha F150 four-stroke EFI outboards

• EFI high-pressure electric-pump construction

• Designed for vapour-separator, VST or cooled fuel-module installation

• Confirm the engine serial, pump pressure and port orientation before installation

🧰 Kit / Assembly Contents

• 1 × Complete electric fuel-pump assembly/cartridge - Part Number: 63P-13907-03

• 1 × Integrated electrical connector or terminals

• 1 × Inlet screen/strainer - supplied where included by the selected manufacturer

• Seals, module O-rings and mounting hardware are renewed separately unless included

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 63P-13907-04 → Later reference associated with 63P-13907-03

• 63P-13907-03 → Supersedes 63P-13907-02/-01/-00

OEM / Related Numbers:

• 63P-13907-00

• 63P-13907-01

• 63P-13907-02

• 63P-13907-04

Aftermarket / Verified Equivalents:

• Yamaha aftermarket FP13/FP-series high-pressure pump

• Recmar: REC63P-13907-03

🚤 Compatibility

Commonly used on:

• Yamaha F150 four-stroke EFI outboards

Typically suits:

• Engine models:

• F150A/F150B and LF150 model families

• F150 four-stroke outboards from the early EFI production through later 63P revisions

• HP / Output Range: 150HP

• Engine / System Type: Yamaha F150 four-stroke EFI outboards

• Year Range: Approximately 2004 - 2017; model- and serial-dependent

• Serial / Pump Identification: Match P/N 63P-13907-03 to the model-specific parts diagram and verify pressure, electrical connector, inlet/outlet orientation and mounting before ordering.

🔌 Function

The high-pressure electric pump supplies the pressure and flow required by the EFI fuel rail and injectors. It normally operates inside a vapour separator or cooled fuel module.

Common signs of failure:

• Low or unstable fuel-rail pressure

• Crank/no-start or difficult hot starting

• Engine hesitation, lean surging or loss of power

• Pump noise, excessive current draw or blown fuse

• Intermittent stalling as the pump or fuel module heats up

📦 Condition

• New aftermarket replacement part

• Brand new

• Supplied in original or equivalent packaging