63V-W0093-00 Aftermarket Yamaha Carburettor Repair Kit 9.9F, 13.5AMH, 15F | Sawley's Select Marine Parts

🔧 Product Description

Aftermarket Yamaha 9.9HP-15HP carburettor repair kit - Replacement Part Number: 63V-W0093-00

A carburettor service kit for Yamaha 9.9HP, 13.5HP and 15HP two-stroke outboards in the 63V engine family. The later 63V-W0093-01 service package carries the detailed component set below and is the direct related revision for these carburettors.

⚙️ Key Features

• Services one Yamaha 63V-family carburettor

• Includes float, needle valve, pilot screw, gaskets and hardware

• Exact related service-component numbers listed below

• Suitable for 9.9HP-15HP two-stroke outboards

• Later related service kit: 63V-W0093-01

🔄 Supersession & Cross Reference

OEM Supersession Chain:

• 63V-W0093-01 → Later related service revision for 63V-W0093-00

OEM / Related Numbers:

• 63V-W0093-00

• 63V-W0093-01

Aftermarket / Verified Equivalents:

• Recmar: REC63V-W0093-00

• Recmar later revision: REC63V-W0093-01

Included Components:

• 1 × Pilot screw - Part Number: 679-14923-00-00

• 1 × Gasket - Part Number: 63V-14126-00-00

• 1 × Float-chamber gasket - Part Number: 63V-14984-00-00

• 4 × Screws with washers - Part Number: 97980-04114-00

• 1 × Gasket - Part Number: 6G1-14398-00-00

• 1 × Float - Part Number: 63V-14985-00-00

• 1 × Needle valve - Part Number: 6G1-14546-01-00

• 1 × Float pin - Part Number: 676-14186-00-00

• 1 × Clip - Part Number: 633-14159-00-00

• 1 × Float-arm pin - Part Number: 6H4-14548-00-00

🚤 Compatibility

Commonly used on:

• Yamaha carburetted outboards using the listed OEM carburettor service kit

Typically suits:

• Engine models:

• Yamaha 9.9F / 9.9FMH family

• Yamaha 13.5AMH

• Yamaha 15F / 15FMH family

• HP Range: 9.9HP - 15HP

• Engine Type: Carburetted two-stroke outboard

• Year Range: Approximately 1996 onward, depending on model code

• Quantity Required: One kit per carburettor

🔌 Function

The kit renews the carburettor's float-control, inlet-valve and sealing components. Correct rebuilding restores fuel-bowl level, prevents air and fuel leaks and stabilises the mixture from starting through full-load operation.

Common signs of failure:

• Hard starting or excessive choke/enrichment required

• Rough idle, hunting or repeated low-speed stalling

• Hesitation, flat spots or intake backfire during acceleration

• Fuel leakage, flooding or an incorrect float-bowl level

• Lean surging, reduced power or fuel starvation under load

• Rich running, smoke, spark-plug fouling or excessive fuel consumption

📦 Condition

• Brand new aftermarket replacement part

• New and unused

• Supplied in manufacturer or equivalent protective packaging