779711 Evinrude Johnson XD100 Oil 1 GAL | Genuine OEM BRP Outboard Part
779711 Evinrude Johnson XD100 Oil 1 GAL | Genuine OEM BRP Outboard Part
Couldn't load pickup availability
🔥🔥 VERY LIMITED TIME PRICE DEAL!! 🔥🔥
🔧 Product Description
Genuine BRP XPS Marine XD100 Synthetic-Formula Two-Stroke Oil - One US Gallon - Part Number: 779711
Genuine BRP XPS Marine XD100 premium synthetic-formula two-stroke outboard oil in a one-US-gallon container.
XD100 is formulated for Evinrude E-TEC, E-TEC G2, direct-injection and compatible oil-injected two-stroke outboards.
Its high lubricity and detergent package help reduce friction, wear and combustion deposits while promoting clean, low-smoke operation.
⚙️ Key Features
• Genuine BRP XPS Marine XD100 oil
• Current product reference 779711
• Service part number 0779711
• One US gallon / approximately 3.78 litres
• Premium synthetic-formula two-stroke oil
• TC-W3 marine-oil grade
• Designed for Evinrude E-TEC and direct-injection engines
• Ashless, low-smoke and low-odour formulation
• High detergency helps reduce piston and combustion deposits
• Excellent cold-flow performance
🔄 Supersession & Cross Reference
OEM Supersession Chain:
• 0764357
• 764357
• 0779711
• 779711
OEM / Related Numbers:
• 779711
• 0779711
• 0764357
• 764357
• UPC: 745419381943
• Related quart container: 779710
• Related 2.5-gallon container: 779712
Aftermarket / Verified Equivalents:
• HP Marine® Synthetic 2-Stroke Oil
Oil-substitution warning:
• A general TC-W3 oil should not be described as a direct XD100 equivalent.
• An engine programmed for exclusive XD100 use must continue using XD100 unless an authorised service technician changes the EMM oil setting.
• Engines operating on their standard oil setting may permit other oils listed in the applicable operator's guide.
• Always follow the exact engine model's lubrication requirements.
🚤 Compatibility
Recommended or preferred for selected:
• Evinrude E-TEC outboards
• Evinrude E-TEC G2 outboards
• Evinrude direct-injection two-stroke engines
• Johnson and Evinrude oil-injected outboards where XD100 is approved
• Engines operating in low ambient temperatures
• Engines whose EMM has been programmed for exclusive XD100 use
Important operating note:
• An authorised Evinrude technician must perform the optional XD100 EMM programming.
• Dealer programming can reduce normal oil consumption compared with a conventional oil setting.
• Never assume an engine is set to XD100 mode solely because XD100 oil is already in the tank.
• Do not mix XD100 with petrol as though it were a maintenance additive unless the engine specifically uses premix and the operator's guide approves it.
🔌 Function
XD100 lubricates bearings, pistons, cylinder walls, connecting rods and other internal components in a two-stroke engine.
The oil is metered into the engine and consumed during combustion.
Benefits of the correct oil include:
• Reduced piston and cylinder wear
• Cleaner piston rings
• Fewer combustion-chamber deposits
• Improved spark-plug cleanliness
• Lower visible smoke
• Improved cold-weather oil flow
• Protection against internal corrosion
• Reliable operation of the oil-injection system
Common signs of incorrect or degraded oil supply:
• Low-oil or no-oil warning
• Excessive smoke
• Injector or oil-line contamination
• Carbon deposits around piston rings
• Spark plugs foul repeatedly
• Oil tank contains water or debris
• Engine enters a protection mode
• Oil lines contain air bubbles
• Unusual internal mechanical noise
Recommended handling:
• Keep the container sealed and clean
• Prevent water, fuel and dirt from entering the oil
• Clean around the oil-tank cap before filling
• Use a clean funnel dedicated to two-stroke oil
• Do not combine unidentified oils in the tank
• Prime or bleed the oil system after hose or component replacement
• Confirm the oil-level warning system operates correctly
• Store upright away from excessive heat and direct sunlight
📦 Condition
• Genuine BRP XPS Marine OEM lubricant
• Brand new sealed one-gallon container
• Approximately 3.78 litres
• Supplied in genuine or equivalent protective packaging
Share
