779712 Evinrude Johnson XD100 Oil 2.5 GAL | Genuine OEM BRP Outboard Part

🔧 Product Description

Genuine BRP XPS Marine XD100 Synthetic-Formula Two-Stroke Oil - 2.5 US Gallons - Part Number: 779712

Genuine BRP XPS Marine XD100 premium synthetic-formula two-stroke outboard oil in a large 2.5-US-gallon container.

The container holds approximately 9.46 litres and is suited to higher-use boats, commercial operation, multi-engine vessels and owners wanting a larger supply of the specified XD100 oil.

⚙️ Key Features

• Genuine BRP XPS Marine XD100 oil
• Current product reference 779712
• Service part number 0779712
• 2.5 US gallons / approximately 9.46 litres
• Premium synthetic-formula two-stroke oil
• TC-W3 marine-oil grade
• Suitable for Evinrude E-TEC and E-TEC G2 engines
• High lubricity reduces friction and wear
• Maximum detergency helps control combustion deposits
• Ashless, low-smoke and low-odour operation
• Large economical container

🚤 Compatibility

Recommended or preferred for selected

• Evinrude E-TEC outboards
• Evinrude E-TEC G2 outboards
• Evinrude direct-injection outboards
• Johnson and Evinrude oil-injected two-strokes where XD100 is approved
• Twin-engine installations
• Commercial and high-hour operation
• Cold-weather operation where the applicable operator's guide specifies XD100

Important operating note

• The large container does not change the oil specification or mixing requirements.
• Keep the oil clean when transferring it to an engine-mounted or remote reservoir.
• Use a clean transfer pump or funnel suitable for two-stroke oil.

🔌 Function

XD100 provides the oil film required to lubricate and protect a two-stroke engine's internal moving components.

The high-detergency formulation helps minimise deposits that can restrict piston rings or contaminate combustion chambers.

Recommended handling

• Keep the cap tightly closed
• Store the container upright
• Avoid introducing dust, water or fuel
• Use clean transfer equipment
• Do not return contaminated oil to the container
• Inspect oil lines and reservoir filters during servicing
• Bleed the oil system after any component has been disconnected
• Dispose of empty containers and waste oil in accordance with local requirements

⚠️ Common Signs of Failure

Common signs of oil-system problems

• Low-oil warning activates
• Oil tank does not vent correctly
• Oil lines contain air
• Oil-injection fittings leak
• Water or fuel contaminates the reservoir
• Excessive exhaust smoke
• Spark plugs foul
• Carbon accumulation increases
• Engine enters a protection or reduced-power mode

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 779712
• 0779712
• 777119 - Earlier related 2.5-gallon reference
• UPC: 745419381936
• Related one-gallon container: 779711
• Related quart container: 779710

Aftermarket / Verified Equivalents

• No direct aftermarket equivalent for Evinrude E-TEC engines programmed for exclusive XD100 use

Oil-substitution warning

• Do not replace XD100 with a generic TC-W3 oil when the engine is programmed for XD100 mode.
• An authorised technician must change the EMM oil setting before a different approved oil is used.
• Lubrication requirements vary by engine model and calibration.

📦 Condition

• Genuine BRP XPS Marine OEM lubricant
• Brand new sealed 2.5-gallon container
• Approximately 9.46 litres
• Supplied in genuine or equivalent protective packaging