836887 Weld Flange | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta weld flange with a 265 mm outside diameter and 14 mm thickness, from the Inlet and Exhaust System group, weighing 3.636 kg and listed for 18 applications across TMD, TAMD, TAD and TD series engines. Both dimensions are the ordering detail - it is welded into the run, so the diameter and thickness must be right before any fabrication begins.

🚤 Compatibility

Typically suits:

• Volvo Penta TMD121C
• Volvo Penta TMD122A
• Volvo Penta TAMD120A
• Volvo Penta TAMD120B
• Volvo Penta TMD120B
• Volvo Penta TAMD102D
• Volvo Penta TAMD121D
• Volvo Penta TAMD122A
• Volvo Penta TAMD122A/C
• Volvo Penta TAMD122D
• Volvo Penta TAD121CHC
• Volvo Penta TD121CHC
• Volvo Penta TD121CRC
• Volvo Penta TAD120AHC
• Volvo Penta TAD120BHC
• Volvo Penta TAD120CHC
• Volvo Penta TD120BHC
• Volvo Penta TD120BRC

• Engine Family: TMD, TAMD, TAD, TD

⚙️ Key Features

• 265 mm outside diameter
• 14 mm thick
• 3.636 kg
• 18 applications across TMD, TAMD, TAD and TD series engines

🔌 Function

Provides a bolted joint face that is welded onto the pipe run so two sections can be joined and parted.

⚠️ Common Signs of Failure

• Exhaust leak at the joint or along the weld
• Cracking in the weld bead or the heat affected zone
• Flange face no longer flat, so the gasket blows
• Bolt holes elongated or studs wasted by corrosion
• Soot deposits fanning out from the joint

🛠️ Service Notes

• Check the diameter and thickness against the pipe before ordering - welded fittings cannot be exchanged once cut in
• Renew the joint gasket and studs, and tighten evenly in a diagonal pattern
• The 6 inch flange 836883 is the bolted alternative fitting in this group

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging