847165 Lube Oil Hose | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta lubricating oil hose, 580 mm long, from the Marine Propulsion group, weighing 0.311 kg and listed for 13 applications across TMD, TAMD and MD series engines.

🚤 Compatibility

Typically suits:

• Volvo Penta TMD70C
• Volvo Penta TAMD61A
• Volvo Penta TAMD62A
• Volvo Penta TAMD63L-A
• Volvo Penta TAMD63P-A
• Volvo Penta TAMD71B
• Volvo Penta TAMD72A
• Volvo Penta TAMD72P-A
• Volvo Penta TAMD73P-A
• Volvo Penta TAMD70E
• Volvo Penta TAMD71A
• Volvo Penta TAMD60C
• Volvo Penta MD70C

• Engine Family: TMD, TAMD, MD

⚙️ Key Features

• 580 mm long
• 0.311 kg
• 13 applications across TMD, TAMD and MD series engines
• L=580mm (Volvo assembly listing)
• Quantity varies by assembly, most commonly one

🔌 Function

Carries pressurised lubricating oil between two points that move relative to each other, where a rigid pipe would fatigue and crack.

⚠️ Common Signs of Failure

• Oil weeping or dripping at the hose or its end fittings
• Outer cover cracked, chafed through or blistered
• Hose gone hard and brittle, or soft and swollen
• Oil pressure dropping, with the leak only showing under load
• Rust bleeding from under the crimp at the fitting

🛠️ Service Notes

• Measure the hose you are taking off - 580 mm is what this one is made to, and a different length will not follow the same route or clear the same obstructions
• Clean the fittings before breaking the joint, and cap the ends to keep grit out of the oil system

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging