847887 Rubber Cone | Genuine Volvo Penta Part
847887 Rubber Cone | Genuine Volvo Penta Part
Couldn't load pickup availability
In stock — Australian warehouse
Typically reaches our store in 3–5 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta rubber cone with a 70 mm inside diameter at the turbocharger end and 107 mm at the filter housing end, from the Inlet and Exhaust System group, weighing 0.225 kg and listed for 3 applications on TAMD series engines, for engines up to the /44088 serial break. It supersedes part number 848621, which was catalogued earlier as a bracket, so the current part is a flexible rubber connector where the superseded number described a rigid item.
🚤 Compatibility
Typically suits:
- Volvo Penta TAMD61A
- Volvo Penta TAMD71B
- Volvo Penta TAMD71A
- Engine Family: TAMD
- Serial Range: Id for turbocharger=70mm and for filter housing=107mm., SN-XXXXXXXXXX/44088
⚙️ Key Features
- 70 mm inside diameter at the turbocharger end
- 107 mm inside diameter at the filter housing end
- 0.225 kg
- Supersedes 848621, previously listed as a bracket
- For engines up to the /44088 serial break
- 70mm (Volvo assembly listing)
🔌 Function
Forms a flexible, stepped connection between the air filter housing and the turbocharger inlet, sealing the intake path while absorbing the movement between the two.
⚠️ Common Signs of Failure
- Perished, cracked or crazed rubber, especially in the folds of the cone
- A split or tear that lets unfiltered air past the filter housing
- Turbocharger whistle changing in tone as the cone collapses under suction
- The cone pulling off the spigot or ballooning at the clamp
- Dust or a fine grit trail on the clean side of the intake
🛠️ Service Notes
- Any leak here admits unfiltered air straight to the turbocharger and the bores, so treat a split cone as urgent rather than cosmetic
- Check the hose clamps and the spigot lips at the same time, as a scored or corroded spigot will cut a new cone
- Confirm the engine falls up to the /44088 serial break before ordering, as the intake arrangement changed
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 847887 → Supersedes 848621
OEM / Related Numbers
- 848621 earlier number superseded by this part
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
