853834 Spacer Sleeve | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta spacer sleeve from the Marine Propulsion group, weighing 0.186 kg and listed for 39 applications across the AD, D, TSK, TMD, DP and DPX families. It is part of the same drive-unit group as bushing 853829 and spindle 853841.

🚤 Compatibility

• Engine Family: AD, D, TSK, TMD, DP, DPX, TAMD, KAD

Full model list at the end of this description.

⚙️ Key Features

• 0.186 kg
• 39 applications across the AD, D, TSK, TMD, DP and DPX families
• Works with bushing 853829 and spindle 853841 in the same group
• Quantity varies by assembly, most commonly three

🔌 Function

Sets the axial spacing between the components on a shaft, holding them at their working positions and taking the clamp load through the sleeve rather than through the bearings.

⚠️ Common Signs of Failure

• Endfloat or rattle in the assembly the sleeve should be setting
• Sleeve found crushed, bellmouthed or worn short at its ends
• Bearings running hot or noisy because the spacing has been lost
• Fretting marks on the faces the sleeve bears against

🛠️ Service Notes

• Measure the endfloat on reassembly against the manual figure rather than assuming a new sleeve puts it right
• Check the bearing faces the sleeve bears on for the wear that shortened it

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta DP-C, DP-C1, DP-D, DP-D1, DP-E, DP-G, DP-A
• Volvo Penta AD41B, AD41D, AD41L-A, AD41P-A, AD41BJ
• Volvo Penta TSK DP-E, TSK DP-S, TSK DPX-A, TSK DPX-C, TSK DPX-R
• Volvo Penta DPX-A, DPX-R, DPX-S, DPX-S1
• Volvo Penta AD31D-A, AD31L-A, AD31P-A
• Volvo Penta KAD42A, KAD42B, KAD42P-A
• Volvo Penta TAMD31A, TAMD31B, TAMD31D
• Volvo Penta TAMD41B, TAMD41D, TAMD41A
• Volvo Penta D41D, D41L-A
• Volvo Penta KAD32P
• Volvo Penta KAD43P-A
• Volvo Penta KAD44P
• Volvo Penta TMD41D