859905 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta shim from the Engine group, 3.05 mm thick and listed for 9 applications across the TMD, MS, TAMD and MD engine series. It falls between 859904 at 3.07 mm and 859906 at 3.02 mm in the graded run, in steps of two or three hundredths of a millimetre. Order on the stamped or measured thickness, which is the only figure that separates one step from the next.

🚤 Compatibility

Typically suits:

• Volvo Penta TMD22A
• Volvo Penta TMD22B
• Volvo Penta TMD22P-C
• Volvo Penta MS2B-A
• Volvo Penta TAMD22P-B
• Volvo Penta MD22
• Volvo Penta MD22A
• Volvo Penta MD22L
• Volvo Penta MD22P

• Engine Family: TMD, MS, TAMD, MD

⚙️ Key Features

• 3.05 mm thick
• Between 859904 (3.07 mm) and 859906 (3.02 mm)
• Steps of 0.02 to 0.03 mm through this part of the run
• 9 applications across TMD, MS, TAMD and MD engines
• TH=3.05mm (Volvo assembly listing)

🔌 Function

Brings a working clearance into specification by adding a precisely graded thickness of steel to the assembly.

⚠️ Common Signs of Failure

• Measured clearance outside the specified window
• Ticking or knocking from the assembly the shim controls
• Shim face polished bright, dished or scuffed
• Thickness reading below the marked size
• Identification marking no longer legible

🛠️ Service Notes

• Check the clearance again after the engine has been run and allowed to cool, rather than signing the job off on the bench figure

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging