859915 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta shim from the Engine group, 2.79 mm thick and listed for 9 applications across the TMD, MS, TAMD and MD engine series. It follows 859914 at 2.82 mm, and the next two part numbers in the run, 859916 and 859917, are catalogued in inches at 0.109 and 0.108 inch. Take care to measure in the same units as the marking you are comparing against.

🚤 Compatibility

Typically suits:

• Volvo Penta TMD22A
• Volvo Penta TMD22B
• Volvo Penta TMD22P-C
• Volvo Penta MS2B-A
• Volvo Penta TAMD22P-B
• Volvo Penta MD22
• Volvo Penta MD22A
• Volvo Penta MD22L
• Volvo Penta MD22P

• Engine Family: TMD, MS, TAMD, MD

⚙️ Key Features

• 2.79 mm thick
• Follows 859914 (2.82 mm) in the run
• Next two numbers, 859916 and 859917, are marked in inches
• 9 applications across TMD, MS, TAMD and MD engines
• TH=2.79mm (Volvo assembly listing)

🔌 Function

Brings a working clearance to specification by adding an exact, graded thickness of steel.

⚠️ Common Signs of Failure

• Clearance out of specification when measured
• Noise from the assembly the shim sets
• Face worn bright, dished or scuffed
• Measured thickness under the marked figure
• Marking rubbed away in service

🛠️ Service Notes

• This part of the run mixes millimetre and inch markings — check the units before comparing a measurement against a step

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging