859917 Shim | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta shim from the Engine group, catalogued at 0.108 inch thick and listed for 9 applications across the TMD, MS, TAMD and MD engine series. It is one thousandth of an inch below 859916 at 0.109 inch, and the next part number, 859918, returns to millimetre marking at 2.72 mm. This is the finest step anywhere in this run, so a micrometer set to the marked units is essential.

🚤 Compatibility

Typically suits:

• Volvo Penta TMD22A
• Volvo Penta TMD22B
• Volvo Penta TMD22P-C
• Volvo Penta MS2B-A
• Volvo Penta TAMD22P-B
• Volvo Penta MD22
• Volvo Penta MD22A
• Volvo Penta MD22L
• Volvo Penta MD22P

• Engine Family: TMD, MS, TAMD, MD

⚙️ Key Features

• 0.108 inch thick
• One thousandth of an inch below 859916 (0.109 inch)
• Next number, 859918, is marked 2.72 mm
• 9 applications across TMD, MS, TAMD and MD engines

🔌 Function

Adds an exact thickness of steel to the assembly so the clearance can be brought to specification by selection.

⚠️ Common Signs of Failure

• Measured clearance outside specification
• Tapping or knocking from the assembly the shim sets
• Shim face polished bright or dished
• Thickness reading under the published figure
• Identification marking worn off

🛠️ Service Notes

• Measure in inches to match the marking — this step and 859916 are a thousandth apart and cannot be told apart any other way
• Do not judge the step from a used shim's marking alone

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging