860143 Wiring Harness | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta wiring harness from the Cables and Fuses group, weighing 0.29 kg and listed for 14 applications. It is supplied as a made-up loom rather than as loose cable, so the terminations and routing lengths are already set.

🚤 Compatibility

Typically suits:

• Volvo Penta 2003
• Volvo Penta 2003R
• Volvo Penta 2003TB
• Volvo Penta 2001B
• Volvo Penta 2001D
• Volvo Penta 2003D
• Volvo Penta 2003T
• Volvo Penta 2003TR
• Volvo Penta 2002B
• Volvo Penta 2002D
• Volvo Penta 2003B
• Volvo Penta 2001
• Volvo Penta 2002
• Volvo Penta 2001R

⚙️ Key Features

• Made-up loom, not loose cable
• 0.29 kg
• Listed for 14 applications
• Cables and Fuses group

🔌 Function

Carries supply current and sensor signals between the engine's electrical components through one bundled, pre-terminated loom.

⚠️ Common Signs of Failure

• Instruments or warning lamps flickering, dropping out or reading wrongly
• Faults that come and go with engine vibration or with the boat working in a seaway
• Outer sheath chafed, cracked or rubbed through where the loom crosses a bracket or edge
• Green or white corrosion in the connector pins, or a connector that feels slack when pushed home
• Fuses blowing repeatedly on one circuit

🛠️ Service Notes

• Check the connector pins, the plug seals and the engine earth point before condemning the harness - corrosion at any of those gives the same symptoms and is far cheaper to put right
• Photograph the routing and the clip positions before removing the old loom; the replacement is cut to the original lengths and will not reach on a different route

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging