860292 Adjusting Washer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta adjusting washer 0.42 mm thick, from the Fuel System group, weighing 0.001 kg and listed for 5 applications across TMD and MD series engines. It is the thinnest of the fourteen thickness steps listed in this run, which span 0.42 mm to 1.28 mm; the next step up is 860293 at 0.46 mm.

🚤 Compatibility

Typically suits:

• Volvo Penta TMD22A
• Volvo Penta TMD22B
• Volvo Penta MD22A
• Volvo Penta MD22L
• Volvo Penta MD22P

• Engine Family: TMD, MD

⚙️ Key Features

• 0.42 mm thick
• Next step up is 860293 at 0.46 mm
• 5 applications across TMD and MD series
• Thinnest of the fourteen steps listed here

🔌 Function

Sets the adjustment by packing the joint out to the required height, one graded step at a time.

⚠️ Common Signs of Failure

• Fuel delivery or timing out of adjustment after a component has been apart
• Hard starting, smoke or rough running dating from a rebuild where the original washer was reused
• Washer faces bruised, fretted or picked up where they bed
• Measured thickness no longer agreeing with the size the washer was fitted as

🛠️ Service Notes

• Order by the measured thickness, not by weight - the published weights are the same across most of this series and do not separate one step from another
• Measure the old washer with a micrometer before ordering; 0.04 mm separates it from the next size and that is below what the eye can judge

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging