861030 Clamp | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta clamp weighing 0.005 kg and listed for 21 applications across the KAD, TAMD and KAMD series engines.

🚤 Compatibility

• Engine Family: KAD, TAMD, KAMD

Full model list at the end of this description.

⚙️ Key Features

• 0.005 kg
• 21 applications across KAD, TAMD and KAMD engines

🔌 Function

Clamps its hose or lead onto its spigot and holds it in place.

⚠️ Common Signs of Failure

• Hose or lead slipping or working off its spigot
• Clamp corroded or seized, or the band cracked
• Screw drive rounded, or the worm thread stripped
• Leakage at the clamped joint

🛠️ Service Notes

• Fit a new clamp rather than reusing one that has been distorted, stretched or corroded; a band that has been drawn down onto a hose once rarely grips evenly again
• Use the correct size and type for the joint — an over-large clamp will not draw down evenly and can cut into a soft hose instead of gripping it
• Position the clamp fully over the spigot or pipe bead, clear of the hose end, and tighten only until the joint is secure; over-tightening crushes hoses, pipes and cable insulation
• Set the screw or head where you can reach it for later checks, and make sure the clamp is not resting anywhere it will chafe a neighbouring hose or harness
• Re-check tightness after the first run up to temperature, as hoses relax and settle once they have been heated

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta KAD42A, KAD42B, KAD42P-A
• Volvo Penta KAD44P, KAD44P-B, KAD44P-C
• Volvo Penta KAMD42A, KAMD42B, KAMD42P-A
• Volvo Penta KAMD43P, KAMD43P-A, KAMD43P-B
• Volvo Penta KAMD44P-B, KAMD44P-C, KAMD44P-A
• Volvo Penta KAD43P-B, KAD43P-A
• Volvo Penta KAD300-A
• Volvo Penta KAD32P
• Volvo Penta KAMD300-A
• Volvo Penta TAMD42B