861998 Suction Pipe | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta suction pipe from the Lubricating and Oil System group, weighing 0.07 kg and listed for 14 applications across the D and MD series.

🚤 Compatibility

Typically suits:

• Volvo Penta D1-13
• Volvo Penta D1-13B
• Volvo Penta D1-13F
• Volvo Penta D1-20
• Volvo Penta D1-20B
• Volvo Penta D1-20F
• Volvo Penta MD2010
• Volvo Penta MD2010B
• Volvo Penta MD2010-C
• Volvo Penta MD2010-D
• Volvo Penta MD2020
• Volvo Penta MD2020B
• Volvo Penta MD2020-C
• Volvo Penta MD2020-D

• Engine Family: D, MD
• HP Range: 13-20 HP

⚙️ Key Features

• 0.07 kg
• Lubricating and Oil System group
• 14 applications across the D and MD series

🔌 Function

Carries oil from the bottom of the sump up to the pump inlet, keeping the pickup submerged and the feed unrestricted.

⚠️ Common Signs of Failure

• Oil pressure low or slow to come up, particularly when hot
• Pressure dropping momentarily when the boat heels or pitches
• Aerated, frothy oil on the dipstick
• Pipe found cracked, chafed or with a loose or perished joint at either end
• Strainer or pickup blocked with sludge or debris

🛠️ Service Notes

• Check the pipe's joints and seals as carefully as the pipe itself - an air leak on the suction side reads as a pump fault
• Clean the pickup screen thoroughly and find out where the debris came from before reassembly

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging