864242 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Marine Propulsion group, weighing 0.313 kg and listed for 15 applications across the TAMD series.

🚤 Compatibility

Typically suits:

• Volvo Penta TAMD61A
• Volvo Penta TAMD62A
• Volvo Penta TAMD63L-A
• Volvo Penta TAMD63P-A
• Volvo Penta TAMD71B
• Volvo Penta TAMD75P-A
• Volvo Penta TAMD72P-A
• Volvo Penta TAMD73P-A
• Volvo Penta TAMD74P-A
• Volvo Penta TAMD74P-B
• Volvo Penta TAMD71A
• Volvo Penta TAMD74C-A
• Volvo Penta TAMD74C-B
• Volvo Penta TAMD74L-A
• Volvo Penta TAMD74L-B

• Engine Family: TAMD

⚙️ Key Features

• 0.313 kg
• 15 TAMD applications
• Marine Propulsion group

🔌 Function

Supports and locates the component it carries, holding it in position against vibration.

⚠️ Common Signs of Failure

• Movement or rattle at the mounting
• Cracks around the bolt holes or at a bend
• Bracket bent, leaving the component out of line
• Fasteners working loose in service
• Corrosion or fretting at the mating faces

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging