866593 Spacer | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta spacer from the Cooling System group, weighing 0.141 kg and listed for 7 applications across TAMD and D series engines. Spacer 866856 is the other Cooling System spacer listed here, covering TAD, TWD and TD engines where rubber cushions are not used for the radiator, so the engine family separates the two.

🚤 Compatibility

Typically suits:

• Volvo Penta TAMD63L-A
• Volvo Penta TAMD63P-A
• Volvo Penta D9A2J
• Volvo Penta D9A2B
• Volvo Penta D9A2K
• Volvo Penta D9A2A
• Volvo Penta D9A2C

• Engine Family: TAMD, D

⚙️ Key Features

• 0.141 kg
• Listed for 7 applications
• For TAMD and D series engines
• Cooling System group

🔌 Function

Sets and holds the gap between two mounted components so they sit at the correct spacing.

⚠️ Common Signs of Failure

• The component it supports sitting proud, loose or out of line
• Spacer crushed, cracked or corroded through
• Bolt working loose because the clamped stack has settled
• Contact faces fretted or polished from movement

🛠️ Service Notes

• Refit the spacer in the same position and the same way round as it came out; many spacers set an end float, an alignment or a preload and are not simply packing
• Never leave a spacer out, substitute plain washers for it, or stack washers to make up a missing one
• Keep the faces clean, flat and free of burrs and old sealant, and check the spacer itself for wear, scoring or having been drawn down out of shape
• Where several spacers or shims come out together, keep them in order and refit them in the same sequence
• Tighten the fastening to the figure given in the workshop manual for your engine, then check any clearance or end float the spacer controls

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging