866805 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Alternator, Charging, Electric Motor and Electric Drives group, weighing 0.152 kg and listed for 9 applications across TAMD series engines. Protecting casing 866804 is listed on the same 9 applications, so check whether the job needs both.

🚤 Compatibility

Typically suits:

• Volvo Penta TAMD162C-C
• Volvo Penta TAMD162A
• Volvo Penta TAMD162B
• Volvo Penta TAMD162C
• Volvo Penta TAMD162C-B
• Volvo Penta TAMD163A-A
• Volvo Penta TAMD163P-A
• Volvo Penta TAMD165A
• Volvo Penta TAMD165C

• Engine Family: TAMD

⚙️ Key Features

• 0.152 kg
• Listed for 9 applications
• For TAMD series engines
• Alternator, Charging, Electric Motor and Electric Drives group

🔌 Function

Carries and locates a charging system component or its guard against the engine.

⚠️ Common Signs of Failure

• Cracks around the mounting holes
• The component it carries sitting loose or out of line
• Bolt holes elongated by a fastener that has worked loose
• Corrosion at the mounting points

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging