874896 Control Cable | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta control cable, 2500 mm long, from the Cables and Fuses group, weighing 0.984 kg and listed for 6 applications across D and TAMD series engines. Power cable 874871 is the same 2500 mm length in the same group, so measuring the old cable will not distinguish them — this is the control cable, and the two are ordered by role rather than by length.

🚤 Compatibility

Typically suits:

• Volvo Penta D12D-A MG
• Volvo Penta D12D-E MG
• Volvo Penta TAMD103A
• Volvo Penta TAMD74A
• Volvo Penta TAMD165A
• Volvo Penta TAMD165C

• Engine Family: D, TAMD

⚙️ Key Features

• 2500 mm long
• 0.984 kg
• Listed for 6 applications across D and TAMD series engines
• Distinguished from power cable 874871 by role, not length
• L=2500mm (Volvo assembly listing)

🔌 Function

Carries control and signal connections between the engine and the helm station over a 2500 mm run.

⚠️ Common Signs of Failure

• Erratic or absent readings at the helm panel
• Engine stopping or refusing to start with no fault at the engine itself
• Connector pins corroded, bent or pushed back
• Sheath cut or chafed where the cable passes through a bulkhead
• Faults that come and go when the loom is moved by hand

🛠️ Service Notes

• Flex the cable along its length with the panel live — a fault that appears on movement is in the cable, not the instrument
• Route the replacement clear of exhaust and moving linkage and support it at the same points as the original

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging