874954 Housing | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta connector housing weighing 0.002 kg and listed for 21 applications across TAD and D series engines. It carries no pole count in its listing, unlike the 2-pole 874955, the 4-pole 874957 and the 12-pole 874966 in the same run, so identify it by the applications it is listed against rather than by looking for a pole figure.

🚤 Compatibility

• Engine Family: TAD, D
• HP Range: 300-480 HP

Full model list at the end of this description.

⚙️ Key Features

• 0.002 kg
• Listed for 21 applications across TAD and D series engines
• No pole count given, unlike the 2-, 4- and 12-pole housings in the same run

🔌 Function

Holds and locates the crimped terminals of a harness connection, keeping them aligned and retained in the mating half.

⚠️ Common Signs of Failure

• Connector that no longer clicks home or springs apart under vibration
• Locking latch cracked or snapped off
• Terminals pushed back so a pin no longer meets its mate
• Housing distorted, melted or discoloured by heat
• Green corrosion in the cavities where water has tracked in

🛠️ Service Notes

• Renew the terminal locking wedge at the same time if the connector uses one — a housing without its wedge will let terminals back out again
• Check the pole count and cavity layout against the old housing; the run holds 2-, 4- and 12-pole versions that look alike

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D6-340I-G, D6-380I-G, D6-440I-G, D6-480I-G, D6-300A-G, D6-340A-G, D6-380A-G, D6-440I-WJ-G, D6-480I-WJ-G, D6-300D-G, D6-340D-G, D6-380D-G, D6-440D-G, D6-480D-G, D6-400A-G, D6-440A-G, D6-300I-G, D6-480A-G
• Volvo Penta TAD840GE-B
• Volvo Penta TAD841-43GE
• Volvo Penta TAD851-53GE