885827 Sleeve | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta sleeve, part number 885827, published at 0.216 kg. It is a workshop special tool with no engine applications listed. Sleeve 885823 and splined sleeve 885560 both publish 0.147 kg and are separate tools; all three are ordered by their own numbers.

⚙️ Key Features

• Volvo Penta special tool 885827
• 0.216 kg
• Distinct from sleeves 885823 and 885560
• Ordered by part number

🔌 Function

Sleeves the shaft or bore during assembly or withdrawal, keeping the component concentric and protecting the finished surface.

⚠️ Common Signs of Failure

• Bore scored or worn oversize
• Outer surface bruised or burred
• Crack or split along the sleeve
• Sleeve no longer a locating fit
• Corrosion in the bore after damp storage

🛠️ Service Notes

• Check which way round the sleeve goes before the old one comes out — sleeves are rarely symmetrical, and one end is usually chamfered or stepped to lead into the bore
• Clean and inspect the bore it seats in; a sleeve takes its final shape and fit from that bore, so corrosion, scoring or an oval bore will spoil a new part
• Draw or press the sleeve in square with the correct tool rather than driving it in — a sleeve started crooked will nip, and the material displaced by a hammer blow never fully recovers
• Renew any O-ring, seal or gasket that seats against the sleeve while it is out, and lubricate on assembly as the manual for your engine specifies
• Confirm the sleeve is fully home to the depth or flush condition the workshop manual gives before reassembling anything on top of it

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging