885847 Nipple | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta nipple, part number 885847, published at 0.102 kg. It is one of three nipples in this run alongside 885813 at 0.161 kg and 885824 at 0.197 kg, each a separate part ordered by its own number.

⚙️ Key Features

• Volvo Penta part number 885847
• 0.102 kg
• One of three separate nipples in this run
• Ordered by part number

🔌 Function

Gives the threaded connection point for attaching a line, hose or gauge to the component.

⚠️ Common Signs of Failure

• Threads picked up, crossed or stripped
• Seeping or weeping under pressure
• Sealing face bruised or pitted
• Hex flats rounded off
• Through-bore restricted by scale or debris

🛠️ Service Notes

• Check the bore is clear before fitting — a nipple is often the feed point or restriction for a circuit, and debris left in it will starve whatever it supplies
• On tapered threads use the paste or liquid sealant specified for the fluid concerned, applied a few threads back from the open end; avoid thread tape on fuel and oil lines, where a shed shred travels downstream into filters, pumps and injectors
• Where the nipple seals on a face or against a washer rather than on its thread, fit a new sealing washer instead of curing a weep by overtightening
• Tighten to the figure in the workshop manual for your engine — these are small fittings in castings and are easily stripped, or the surrounding boss cracked
• Support the pipe or hose so it meets the nipple square and without side load, then check the joint at working pressure and temperature

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging